So if you’ve managed to get a Bell Desire Z while still being a rogers customer, here are the settings for getting your 3G Data working:
To do this, simply go to:
- Settings -> Wireless & networks -> Mobile Networks -> Access Point Names
- Hit the Menu Key and select New APN
- Enter the settings as follows:
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302 (Default Value)
MNC: 720 (Default Value) - Leave everything else blank
- Hit Menu and Save
- Activate the new APN by clicking in the little circle next to its name
- You should see a little 3G pop up in the status bar withing a few seconds and if you are in a good area you will see an H come up as well.
- If for some reason things arent working properly, just pop your battery out and put it back in.
- although you might see the 3G in the corner, it doesn’t always work properly until you do a battery pull
- It is likely that your MMS will not be working either. In order to fix that, simple add a second APN as follows:
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72
APN Type: mms - Leave all other settings blank
- Hit Menu and save
- If you did this properly, you will see it in the list with the APN you created earlier. You should not see a little circle next to the Rogers MMS APN (this is because as an MMS APN it does not need to be set to active – its used in the background for MMS only) If you do happen to see the circle next to it, you probably forgot the last step in the above settings: APN Type: mms