FirstSearch Blue

If you’ve recently ordered a nexus one from the google store and tried to use it on Rogers, you’ll find that the data (3G or EDGE) is not working. The quick and simple fix is to add the APN Settings.

To do this, simply go to:

• Settings -> Wireless & networks -> Mobile Networks -> Access Point Names
• Hit the Menu Key and select New APN
• Enter the settings as follows:
  Name: Rogers
  APN: internet.com
  Username: wapuser1
  Password: wap
  MCC: 302 (Default Value)
  MNC: 72 (Default Value)
• Leave everything else blank
• Hit Menu and Save
• Activate the new APN by clicking in the little circle next to its name
• You should see a little 3G pop up in the status bar withing a few seconds
• POP Your Battery Out and Put it Back In although you might see the 3G in the corner, it doesn’t work properly until you do a battery pull

• It is likely that your MMS will not be working either. In order to fix that, simple add a second APN as follows:
  Name: Rogers MMS
  APN: media.com
  Username: media
  Password: mda01
  Server: 172.25.0.107
  MMSC :http://mms.gprs.rogers.com
  MMS Proxy: 10.128.1.69
  MMS Port: 80
  MCC: 302
  MNC: 72
  APN Type: mms
• Leave all other settings blank
• Hit Menu and save
• If you did this properly, you will see it in the list with the APN you created earlier. You should not see a little circle next to the Rogers MMS APN (this is because as an MMS APN it does not need to be set to active – its used in the background for MMS only) If you do happen to see the circle next to it, you probably forgot the last step in the above settings: APN Type: mms

That’s it! Your 3G Data should now be working on your Rogers Nexus One